Skip to content
MiniDisc CentralSearch

Device

TEAC MD-H500i

Source reference · needs review · MiniDisc Wiki, September 2026 snapshot · Source edited 2025-03-06

Manufacturer
TEAC
Model / source grouping
MD-H500i
Device type
deck
MDLP modes
No
NetMD interface
No
Hi-MD support
No

Capabilities above are source-stated. USB transfer direction, software requirements and regional variants need separate checks.

Manuals & documentation

Search documentation

Accessories & internal parts

Source-referenced components. Check conditions before substituting parts.

Preserved source

Original source · Source edits are not technical review dates. Original credits and licence notes remain below.

Source: MiniDisc Wiki contributors · September 3, 2026 snapshot · CC BY 4.0, except where otherwise credited.

Attribution and changes

Adapted from “TEAC MD-H500i”. Links, layout and file names normalized; missing database fields restored; remote embeds replaced with links. Manufacturer manuals and separately credited photographs retain their original attribution.

teac_md-h500i.jpg

Name MD-H500i
Manufacturer TEAC
Released 1999/01
Device type deck
Recorder Recorder
MDLP No
NetMD No
Hi-MD No
Radio No
Dimensions Width 285 x H 103 x D 340 mm
Weight 3.7kg
ATRAC ver 4
Battery Not recorded Not recorded
Battery notes Not recorded
Sidecar (depr) Not recorded
Voltage 100, 100-110, 120, 100-230, 230
Power cable AC
Price (launch) Not recorded
¥75 000
-
Inputs RCA in, Digital optical (TOSLINK)
Outputs RCA out, Digital optical (TOSLINK)
Control Not recorded

Updated version of the MD-H500 and part of the Reference 500 series by TEAC. Main visual changes were a new display panel and slightly different button layout on left side of the deck. It was significantly lighter and lost the built in clock. Some changes to the specifications, mostly in relation to frequency response and signal-to-noise ratio also suggest revised internals although it is not MDLP capable. It also had a different remote control too.

Like its predecessor it could be controlled using a dedicated remote control (RC-725) but when linked to an amp from the same range it can be controlled as part of an overall integrated system using the RC-711. The RC-711 has limited MD controls so the RC-725 is required to access the full range of features.

  • Frequency Response: 20Hz-20kHz +/-1dB
  • Sampling Frequency: 44.1kHz
  • Signal-to-noise ratio (playback mode): More than 92 dB
  • Dynamic Range (playback mode): More than 90 dB
  • Analogue input sensitivity / input impedance: 500 mV / 22 kOhms or more
  • Analogue output level / output impedance: 2.0 V / Less than 300 Ohms
  • Digital input: Optical (wave length 666 nm) -15dBm ~-21dBm
  • Power Consumption: 14w
  • Remote control: RC-725

Content adapted from: audio-heritage.jp

Manuals

Repair

Photos

Have photos or data to add? Edit the page! We do not accept contributions via email.

Additional specifications and references
ScmsYes
Web MdNo (not NetMD)
ExportNo
Remote Page
PickupKMS-260A
Atrac IcCXD2650R / CXD2652/R/AR
ManualUser manual, Service manual
RegionJapan, US/Canada, Europe