Skip to content
MiniDisc CentralSearch

Device

Kenwood M919

Source reference · needs review · MiniDisc Wiki, September 2026 snapshot · Source edited 2025-04-26

Manufacturer
Kenwood
Model / source grouping
M919
Device type
auto
MDLP modes
No
NetMD interface
No
Hi-MD support
No

Capabilities above are source-stated. USB transfer direction, software requirements and regional variants need separate checks.

Manuals & documentation

Search documentation

No directly linked document has been identified for this record. Search the manual library or consult the source below.

Preserved source

Original source · Source edits are not technical review dates. Original credits and licence notes remain below.

Source: MiniDisc Wiki contributors · September 3, 2026 snapshot · CC BY 4.0, except where otherwise credited.

Attribution and changes

Adapted from “Kenwood M919”. Links, layout and file names normalized; missing database fields restored; remote embeds replaced with links. Manufacturer manuals and separately credited photographs retain their original attribution.

kenwood_m919.jpg

Name M919
Manufacturer Kenwood
Released 2000/03
Device type auto
Recorder Player
MDLP No
NetMD No
Hi-MD No
Radio Not recorded
Dimensions 1-Din 178 (W) x 50 (H) x 160 (D) mm
Weight 1700
ATRAC ver Not recorded
Battery Not recorded Not recorded
Battery notes Not recorded
Sidecar (depr) Not recorded
Voltage 12
Power cable Not recorded
Price (launch) Not recorded
¥63 000
-
Inputs Not recorded
Outputs RCA out, Speaker amplifier
Control Not recorded

MD receiver with fully automatic slide panel and a multifunctional full-dot FL tube display. The M919 is part of the 2000s "919" series by Kenwood. Often paired with the D919 CD player. Equipped with 1.5V high-voltage pre-outs and a 45W x 4ch ultra-high power amplifier. Featuring DSP/EQ settings, different S.A. options, 2-mode font selection and Clock/Stop Watch/Timer/Alarm functions.

Later be followed up by the Kenwood M929.

[MD department]

  • Frequency response: 20Hz to 20kHz (±1dB)
  • S/N ratio: 90dB (1kHz)
  • Dynamic range: 90dB
  • Stereo Separation: 85dB

[FM section]

  • Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)

[AM section]

  • Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ

[EQ section]

  • Equalizer center frequency: 60,120,250,500,1k,2k,4k,8k,16kHz
  • Variable range: ±12dB

[Audio part]

  • Maximum output: 45W x 4
  • Rated output: 28W x 4 (4Ω, 1kHz, 10%THD)
  • Pre-out level: 1500mV (FM/10kΩ)

[Common part]

  • Power supply voltage: 14.4V (11 to 16V)
  • Maximum current consumption: 10A
  • Embedded dimensions: 178 (W) x 50 (H) x 160 (D) mm
  • Mass: 1.7kg

Content adapted from: Kenwood Press Release (archived) Kenwood Press Release (archived) (MiniDisc Wiki mirror)

Manuals

Repair

Photos

Have photos or data to add? Edit the page! We do not accept contributions via email.

Additional specifications and references
Remote Page
Manual
RegionJapan